Start a new topic

Default setting for Auto adjust in charts

[This topic is migrated from our old forums. The original author name has been removed]

Since the version 9.2.13, I think, I cannot ever see any chart right away and I always have to go to the chart configuration dialog and check the "Auto Adjust End value" box. Otherwise both start and end values stay at the manual value of zero, and saving the changed setting as default doesn't work anymore. The most useful default configuration would be to have - the End Value as "Auto adjust" - the start value either as manual 0 or, if possible, to auto-adjust it to min(0., min(of data displayed on y axis)).

[This reply is migrated from our old forums.]

Re: Default setting for Auto adjust in charts
HI Vladim, There is unfortunately a flaw in 9.2.13 resulting in any entered Manual Start Value for the Y-axis is also applied to the Manual End Value. We will fix this in the next maintenance version. Regards Roger
[This reply is migrated from our old forums.]

Re: Default setting for Auto adjust in charts
Vladim, This has now been fixed in the just released 9.2.14 version. Download from http://www.dbvis.com/download/ or use Help->Check for Update to upgrade. Regards Roger
[This reply is migrated from our old forums.]

Re: Default setting for Auto adjust in charts
Vladim, This has now been fixed in the just released 9.2.14 version. Download from http://www.dbvis.com/download/ or use Help->Check for Update to upgrade. Regards Roger